Laser Diameter Measurement Tools model LDM-150

Model LDM-150 Non contact Laser outer diameter measurement tools

Laser Diameter Measurement Tools is the high-accuracy installment that uses the laser scan to carry on the no-contacts on-line measurement. It is mainly used in measuring of outer diameter and adjusting the extruder screw or traction speed, to control the outside diameter. It is applicable to measure and control the diameter of metal wires, glass, pipes, wire and cable, etc.

It can also be applied to the outer diameter of workpiece and size measurements.

1. Technical parameters

Model	Measuring Range	Resolution	Accuracy
LDM-150	0.2 - 145mm	0.001	0.02mm

2. The performance indicators

Measurement: Laser scanning

Laser: Visible red semiconductor laser

Laser output power: <2mW

Operating voltage: ~ 220V plus/minus 15% 50 - 60Hz

Operating temperature: -10 ~ 40 Degrees Celsius
Humidity: <85% RH

Work mode: continuous

Power consumption: <30W

Dimensions:

LDM-150 Gauge head: 910mm(length) * 80mm(wide) * 292mm(high)

3. Characteristics

1). Can be connected PLC, industrial computer.

2). RROFIBUS-DP can be allocated and MODBUS converter and PLC, IPC Connect.

3). Can be equipped remote controller DDC-3, DDC-5, on the extruder and automatic feedback control to control the tolerance, improve product quality, reducing consumption.