Axis Diameter Measuring Gauge

Axis Diameter Measuring Gauge / Rubber Roller Measuring Detector

Axis Diameter Measuring Gauge uses laser scanning principle to realize non-contacting and high-precision measurement and control. It can be used for matal shaft, rubber roller, magnetic roller to show the diameter, non-roundness and runout.

1. Technical parameters

Model	Measuring Range	Resolution	Accuracy
LDM-50S	0.2-45mm	0.001	0.002mm
LDM-100S	0.2-95mm	0.01	0.01mm
LDM-150S	0.2-145mm	0.01	0.01mm

Photo 1: LDM50S Axis Diameter Measuring Gauge
Rubber Roller Measuring Detector

2. The performance indicators

Measurement: Laser scanning

Laser: Visible red semiconductor laser

Laser output power: <2mW

Operating voltage: ~ 220V plus/minus 15% 50 - 60Hz

Operating temperature: -10 ~ 40 Degrees Celsius
Humidity: <85% RH

Work mode: continuous

Power consumption: <30W

Photo 2: DDC-6 Display Controller

3. Display Controller (Model:DDC-6)

1). It be used to remote display and control.

2). Can simultaneously measure the outside diameter, roundness, runout, including oval diameter. It can be used for shaft testing, the detection of rubber roller, honeycomb ceramic detection.

Signal distance: more than 500m

Output voltage: plus/minus10V

External dimensions: 350mm * 350mm * 100mm (Model:DDC-6)

CE Certifications